How to replace the belt of the paper sheeting machine

How to replace the belt of the paper sheeting machine?

paper sheeting machine first coats the glue on a piece of paper, and then combines it with another piece of paper. There are semi-automatic and fully automatic ones on the market, and the fully automatic ones are more expensive. The laminating machine is a compounding of paper and film, and the glue is applied to the film first instead of the paper. Generally, these equipments are used in color printing carton factories.

How to replace the belt of the paper sheeting machine?

What are the maintenance measures for the paper sheeting machine?

What are the precautions for using the paper sheeting machine?

How to replace the belt of the paper sheeting machine?

If the paper sheeting machine is installed, there are actually the following steps. Before installing the paper sheeting machine belt, if the middle distance between the two shafts is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as needed after the belt is installed. If the distance between the two shafts cannot be adjusted, you can insert one belt into the groove of the pulley first, then turn the other pulley, install the belt, and install another set of laminator belts in the same way.

What are the maintenance measures for the paper sheeting machine?

An electric system is the power unit of the paper sheeting machine when it works, it is simply the heart of the paper sheeting machine. This is an electric system used to maintain the carton. The following five measures are proposed:

1. The voltage when the paper sheeting machine is started should be consistent with the rated voltage. It is not suitable to start the melter if the voltage is too high or too low; the general voltage value is 50% to 10% of the rated voltage value.
2. After the circuit board of the paper sheeting machine fails, be sure to cut off the power supply and do not continue to use it. At the same time, you need to find a professional for maintenance, and you cannot disassemble it yourself.
3. To develop good use habits, as long as the operation is correct, the occurrence of failures can be reduced.
4. Before starting the carton, check whether the machine rotates smoothly, whether it is stuck, blocked, and whether the belt connection is normal; if there is any abnormality, do not continue the paper sheeting machine.
5. Remove the dirt around the paper paste, nearby sundries, etc., and keep away from flammable and explosive items.

What are the precautions for using the paper sheeting machine?

1. The paper paste can only be used after the blot is dry, otherwise it will cause the product to foam or pull.
2. When mounting, pay attention to the direction of paper strands, especially thick paper, so as to reduce the phenomenon of paper being rolled, pulled and rolled.
3. The products to be printed by the paper sheeting machine must be straight, and the uneven paper with the phenomenon of "lotus leaf edge" and "tight edge" should be dealt with first. "It can be baked on the paper, and the "edge" paper can be hung to dry.

Ruian Koten Machinery Co.Ltd, which has been established for several years, focuses on the production of paper sheeting machines. Here, you can find the paper sheeting machines you need.