What are the important components of a paper sheeting machine?
paper sheeting machine is mainly used for paper packaging and printing machinery such as paper laminating machine, corrugating machine, laminating machine, etc. The corrugated paper is placed on the belt, and the paper is transported forward by suction on the belt. It has high production efficiency and a large number of operators. Less features are generally well received by customers.
What are the important components of a paper sheeting machine?
How to control the production quality of paper sheeting machine?
What should we pay attention to after the production of the paper sheeting machine is over?
What are the important components of a paper sheeting machine?
- In the transmission system, the paper sheeting machine replaces the traditional gear chain with a timing belt, which solves the problem of inaccurate fitting of the surface and bottom paper due to metal wear.
- In the paper leveling section, the paper sheeting machine adopts a synchronizing back-propelling gauge. The top and bottom gauges simultaneously push the top and bottom sheets into the laminating section, and can fine-tune the fit of the top and bottom sheets without stopping.
- Glue coating system, paper sheeting machine adopts automatic glue replenishing device, cooperates with glue loss and recycling cycle to avoid glue waste. According to product requirements, the glue thickness control wheel can be adjusted, and the special pattern rubber roller can be used to effectively solve the problem of coating and smearing and save glue consumption.
How to control the production quality of paper sheeting machine?
- Take different measures for different processes. For example, for products that have been covered, the penetration of the adhesive can be ensured by using film-coated adhesives, grinding the sticky mouth, or molding dot lines at the sticky mouth. Improve pasting fastness.
- Control the coating amount of the adhesive. The thickness of the adhesive is usually controlled to 0.3mm, which can meet the requirements after being squeezed and spread by the belt.
- The pressure of the pressure rollers of the paper sheeting machine should be adjusted according to the thickness of the paper, so that they have the same pressure on the paper to ensure that the paper conveying is not skewed. Form obvious indentation or crush the dark rib of the carton to death, and once the pressure is released, the dark rib will pop open immediately.
- Control the drying time of the adhesive. For fast-drying adhesives, there is no such problem; for slow-drying adhesives, sufficient drying time should be reserved after inspection and packing, and it must be Put some pressure inside the box.
What should we pay attention to after the production of the paper sheeting machine is over?
- Check whether the tool is complete, whether it is placed in the correct position, and whether there is any debris. If the above situation occurs, it should be sorted out and cleaned immediately.
- Check the sticker workbench emergency switch and safety door safety device. If the emergency switch or safety device fails, it should stop immediately, suspend production, report to the supervisor and the equipment department for maintenance in time, and make a record.
Ruian Koten Machinery Co.Ltd. has worked on the production of paper sheeting machines for over ten years. You can find the best paper sheeting machine in this company.