What is the production procedure of the case making machine?
The case making machine generally adopts the Feida automatic paper feeding structure, the overall action is fully pneumatically controlled, and the structure is simple and reasonable. The width adjustment of the stacking platform and the feeding platform adopts the center concentric adjustment.
What should the case making machine pay attention to when handling goods?
What is the process of using the case making machine?
What is the production procedure of the case making machine?
What should the case making machine pay attention to when handling goods?
- When the automatic case making machine is in use, the cover should be loosened or loosened as much as possible after cutting, which can effectively prevent multiple covers from sticking together and being sucked up.
- People are using my automatic case making machine to make blotting paper, which may be caused by the untreated cover or some poor paper. These papers are generally highly breathable. Therefore, in It is easy to feed many sheets of suction paper, therefore, the quality of the book paper should be checked.
What is the process of using the case making machine?
- Turn on the electric heating power on the control panel of the case making machine, heat the glue to dissolve the glue completely, set the temperature according to different glues (usually 60-80 degrees Celsius), the viscosity of glue is closely related to the temperature, so be sure to control the temperature .
- The use of heating and timing knobs. When the knob is on heating, it means heating immediately, and when it is on timing, it means heating according to the set time. At this time, it is necessary to set the time, and set n hours, which means from now on Heating started after n hours.
- Put down the glue roller and close it with the upper glue roller.
- Turn on the rubber roller button, turn the speed of the rubber roller and the rubber pump on the control panel, so that the rubber pump and the rubber roller start to run, first pump warm water to the rubber roller, and after pumping warm water for a few seconds, make the rubber roller preheat first, and the valve Go to the gluing place, and the glue will be drawn on the rubber roller.
- Adjust the glue roller of the case making machine up and down to adjust the thickness of the glue.
- Adjust the position of the scraper according to the size of the paper.
- Turn on the blower of the case making machine.
What is the production procedure of the case making machine?
- Adjust the handwheel according to the thickness of the cardboard, so that the paper and cardboard are pre-pressed on the opposite side of the pre-pressing roller.
- Adjust the gap between the pinch roller and the conveyor belt so that the cardboard can pass smoothly.
- Adjust the adjustment lever according to the thickness of the cardboard, so that the gap between the conveyor belt and the folding belt is suitable for the thickness of the cardboard.
- The thickness of the cardboard is different, and the adjustment hand wheel should be adjusted to make the distance between the first layer and the fourth layer rollers suitable for the thickness of the cardboard.
If you want to order a case making machine, you must choose Ruian Koten Machinery Co.Ltd, because they can provide the most high-quality and cheap case making machine.