Views: 0 Author: Site Editor Publish Time: 2021-08-05 Origin: Site
Mechanization has become a major trend in the world. In many industries, mechanization is being used to improve their efficiency, and the book industry is no exception. Now the requirements for books are getting higher and higher, and hardcover books are very popular. Hardcover case makers have become a popular choice. Let us understand the review of the hardcover case maker.
Here is the content list:
What is the hardcover book case making machine?
What are the characteristics of the hardcover book case making machine?
Precautions for hardcover book case making machine
The hardcover case maker generally adopts the feeder automatic paper feeding structure, and the overall action is fully pneumatically controlled, and the structure is simple and reasonable. The width adjustment of the stacking platform and the feeding platform adopts the center concentric adjustment.
The hardcover case maker generally adopts the feeder automatic paper feeding structure, and the overall action is fully pneumatically controlled, and the structure is simple and reasonable. The width adjustment of the stacking platform and the feeding platform adopts the center concentric adjustment, and the operation is simple and error-free. The cardboard feeding table adopts linear guide rails, which is accurate and error-free, and there is an automatic shutdown device for cardboard shortage, which reduces the scrap rate of good products. The conveyor belt adopts a high-power suction fan to make the paper conveying more stable and accurate. In addition, the paper conveying and positioning system adopts imported high-precision photoelectric control, which makes the positioning of paper and cardboard more accurate and reliable. The rear-mounted automatic four-side dismantling machine adopts a unique automatic crimping and crimping mechanism to ensure the qualified rate of the finished product. The receiving platform of the hardcover bookcase making machine adopts desktop stacking conveying and unloading, which is more convenient for receiving.
First of all, there should be no looseness or looseness after cutting, and cover should be shaken when installing the cover. Each cover is charged with static electricity, and the most important thing is that static electricity must be removed when the cover is surface treated. A part of the adhesive will remain in the surface treatment of the cover, so it can be evenly distributed by spraying powder or other similar materials on the untreated area.
Secondly, the gray cardboard is cut by a paper cutter, because the gray cardboard cut by the paper cutter will leave a knife edge (that is, the cross-section of the gray cardboard is uneven), so it is easy to produce voids in the process of making the shell. If the edge or hemming is not tight, it is usually recommended to use a hardcover bookcase-making machine to cut gray cardboard books and periodicals to avoid such situations. The gap between the original manuscript is too large, exceeding the normal working range by more than 2mm (normal working range is generally about 1mm). If the flatness of the bottom mold table is different, it should be leveled.
In addition, when making larger bookcases, blisters are likely to occur on the cover. This may be caused by the air not being discharged when the cover is glued. At this time, we can add a cross arm in the middle of the nozzle plate or add a bottom mold. A layer of sponge. The cover is not in contact with the adhesive or the pressure is too small when the two-way flattening is performed. In general, it depends on the situation to make adjustments.
Ruian Koten Machinery Group Co., Ltd has been committed to the manufacture of hardcover books for many years and enjoys a high reputation in the industry. If you are considering buying, you can choose from our company, I believe you will not be disappointed.
