How can we use the three knife trimmer

How can we use the three knife trimmer?

The book is made through several technological processes, such as computer design and typesetting, CTP plate making, printing machine printing, binding machine binding, and three knife trimmer cutting the finished product.

What are the adjustment steps of the three knife trimmer and cutting specifications related institutions?

How to sharpen and replace the blade of the three knife trimmer?

What are the maintenance and upkeep steps for the three knife trimmer?

What are the adjustment steps of the three knife trimmer and cutting specifications related institutions?

1. Remove the book press.
2. Remove the front knife: each plastic strip of the side knife and its pressure plate to assist the book pillow and push plate Adjust the side knife: loosen the fastening screw, rotate the handwheel, and trim the side of the three knife trimmer according to the scale mark. Adjust the The book is made through several technological processes, such as computer design and typesetting, CTP plate making, printing machine printing, binding machine binding, and three-sided book cutting machine cutting the finished product.knife to the size required for cutting, and then tighten the screws.

(4) Loosen the inner hexagon nut, adjust the left book stop lever to the position suitable for the cutting size, and then tighten the inner hexagon screw.

(5) Adjust the book pushing mechanism of the three knife trimmer: loosen the nut, rotate the hand softly, adjust the pointer to the size shown on the ruler and the size required for the cutting width, and then tighten the nut.

(6) Install the book press suitable for the cutting size, the auxiliary book pillow, the lining plate, the plastic blades of the front and side knives and their pressure plates, and the book stop plate, and then fasten the relevant screws.

How to sharpen and replace the blade of the three knife trimmer?

1. Sharpening of the blade:
   The quality of the edge of the three knife trimmer blade plays a decisive role in the smoothness and smoothness of the edge of the cut object. Generally, the blade angle is about 19°.
   The angle can be slightly larger when cutting stiffer paper.
2. Replacement of blades

Put the blade to be replaced on the blade changer of the three knife trimmer, make the cutting edge close to the plastic strip, cover the knife shell on the blade, turn the two screws so that the cutting edge is on the plastic strip, and make the blade rest on the plastic strip. The back of the knife shell is placed on the tool changer, and then use the socket wrench to fasten the two screws. After that, screw the knife handle on the screw hole on the end face of the side knife shell, push up the left and right knife bodies, and fasten the knife body. The screw on the front knife can also be adjusted in the same way.

What are the maintenance and upkeep steps for the three knife trimmer?

1. Before starting the work, the main parts of the three knife trimmer should be checked, the sensitivity of the safety device, the lubrication of each lubrication point, the firmness of the connection parts of the main parts, etc., and the drive can be started after checking properly.
2. The three knife trimmer should be cleaned once before the end of each shift.
3. Carry out a comprehensive cleaning and inspection every two weeks.
4. When the three knife trimmer is not used for a long time, the four large tension springs should be in a loose state, and each machined surface should be coated with anti-rust grease.
5. It is not allowed to use inappropriate tools and unreasonable beating methods when disassembling the three knife trimmer.

Ruian Koten Machinery Co.Ltd has focused on the production and development of three knife trimmers for more than ten years, and they have always put the needs of customers as their top priority. Here, you can choose the three knife trimmer that suits you.