What are the precautions for using a carton laminating machine?
The carton laminating machine has the functions shutdown protection, correction function, anti-wrinkle device, linerless lamination, infrared device, double rubber roller heater, microprocessor system and so on.
What are the steps to start the carton laminating machine?
What are the precautions for using a carton laminating machine?
What are the main components of carton laminating machine?
What are the steps to start the carton laminating machine?
Turn on the unit
Press the tenth button to set the temperature to 80°
After the carton laminating machine beeps, press the tenth button to set the temperature to 125°C
After the carton laminating machine beeps again, it can be used.
What are the precautions for using a carton laminating machine?
The suction film of the carton laminating machine is not available: the vacuum degree is not sufficient, the air escapes, the temperature is not sufficient, the film is too thin, the workpiece is pasted with other materials, the concave depth of the carton laminating machine is not present: the suction time is too short, and the film is not drawn l, the workpiece distance is too small.
The surface of the covered workpiece is folded and not smooth, or the corners can not be wrapped: the film is not straight, the film quality is not good, the workpiece is not well polished, the glue is sprayed too strongly, and the touch plate under the workpiece is too low.
The diaphragm is pulled down and raised in front of the suction cover: whether the solenoid valve or the hand valve is open.
The temperature is too high, the heating time is too long, the film quality is not good and there is no heating.
What are the main components of carton laminating machine?
The carton laminating machine is divided into three parts: gluing, drying tunnel and hot pressing.
Adhesive part. The adhesive part is equipped with an adjustment device to adjust the amount of adhesive to the requirements of different prints. The adhesive roller adopts a rubber roller or steel roller.
Baking part. The drying tunnel is generally 2–3 m long, the drying tunnel of the laminator is equipped with infrared lamps and electric fans. In the upper part of the drying tunnel of the automatic carton laminating machine, there are also high-performance electric heating pipes and exhaust air fans, and the temperature can be adjusted to dry the adhesive and remove exhaust gases.
Hot-pressed part. This part is the key to lamination and is directly related to the bond strength of lamination products. The principle of hot pressing is that the adhesive in the molten state can quickly penetrate into the surface layer of the printed part and penetrate to obtain a strong adhesive intermediate layer. The hot-pressed part consists of a roller set. One of the hollow metal drums is equipped with electric heating pipes and the temperature can be controlled automatically. This set of roller pressures can be adjusted.
If you want to know more about this product, please contact Ruian Koten Machinery Co.Ltd. We will do our best to help you answer your questions.
